Gladiator Rear 2 Piece 1350 CV Extreme Duty Series 20-Pres Jeep Gladiator Adams Driveshaft

Gladiator Rear 2 Piece 1350 CV Driveshaft Extreme Duty Series 20-Pres Jeep Gladiator Adams DriveshaftNow that you own the Newest Generation JT Gladiator, it's time to upgrade to the Strongest American Made Driveshaft.

Why not Buy from a Company that Owns, Lives, and Breathes Offroad vehicles like we do? We Test our Products on our own vehicles to make sure the parts we are using hold up to the Pressure and Abuse that they are put through.

Application:

Fits Jeep JT Gladiator Rubicon Sport - Overland - MOjave Models

This new Extreme Duty Series rear 2 Piece Solid U-joint 1350 CV Driveshaft is no doubt the strongest on the market. We use the same Adams Forged components in Matt's offroad Recovery [the world's largest offroad wrecker].

Bigger tires add more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc., so you want to make sure you are buying the right driveshaft for your Gladiator.

This Driveshaft will work up to a 6 inch Lift, after that the angle may be too Severe and could cause a slight vibration on or off the Throttle.

Benefits for Buying an Adams Driveshaft over Others:

• Lifetime Warranty on, Tube, Welds, Pinion Yoke and Transfer Case Flange Yoke.
• The Only Upgraded aftermarket design with a Slip N Stub in the front section, allowing for movement and flex.
• No measurement needed under 6 inch lift
• The Front section is made out of 3 inch X .083 Wall D.O.M. Tubing and the Rear section is made out of 2 ½ x .095 wall D.O.M.
• Has Long 1 1/2 inch Full Spline Slip with a Long 1 1/2 inch spline slip yoke with a 35 Degree Angle unlike any of our competitors.
• Built primarily with our own Forged Adams Driveshaft components along with Neapco and Spicer parts where applicable.
• Has the Strongest Solid Non-Greasable U-joints on the Market.
• Comes with a Forged Rear U-bolt Style Dana 44 Pinion Yoke that supports the U-joint Cap Halfway around unlike our Competitors.
• Comes with a Solid Steel Rear transfer case Flange yoke with Grade 10 CV Bolts.

This Item will also include the following parts as Pictured up Top, so you have everything you need for the install:

• [1] Adams Steel Rear 1350 Transfer Case Output Shaft Flange Yoke.
• [1] Adams Rear 1350 Forged Pinion Yoke.
• [1] Adams Rear Center bearing bracket that centers the driveshaft in the vehicle.
• [1] Set of 1350 U-bolts.
• [8] Grade 10 CV bolts.
• [1] Adams Driveshaft T-shirt

Driveshafts come painted Gloss Black Show Quality.