Adjustable Sway Bar End Link Kit for JL/JT Front (10 1/2 Inch Long Rods w/ heim joints and Jam Nuts pair) RockJock 4x4

RockJock's Adjustable Sway Bar End Link Set for the front of Jeep JL Wranglers and JT Gladiators features 10 1/2 inch long link rods with 2 5/8 inch of 1/2 inch-20 LH thread and 2 5/8 inch of 1/2 inch-20 RH thread, providing adjustment as-is and extra thread, allowing you to cut them shorter as deemed necessary by your application.

Link sets are included in our Antirock Sway Bar Kits, but are able to be used universally in many applications to replace non-adjustable sway bar links. Additionally, if you have changed the lift amount on your vehicle you may need a different length of sway bar links to accommodate your new lift.

You can simply buy a complete new link set to accommodate your needs. To accommodate the JL and JT application, this kit includes 3 heim joints that feature 1/2 inch-20 RH thread studs and one thru-bolt heim joint, high-misalignment spacers and hardware for use at the passenger's side of axle housing location. Nyloc nuts and jam nuts are included.
Rod Fits:

• (Included In) Jeep JT Gladiator Rear Antirock Sway Bar Kit
• Universal Use

Kit Includes:

• (1) 15 1/2 in. Link Rod (gold)

Rod Specs.:

• 15 1/2 in. Long
• 5/8 in. Diameter
• 1/2 in.-20 LH Threads - 1 1/2 in. Long
• 1/2 in.-20 RH Threads - 1 1/2 in. Long
• Center Smooth Area - 12 1/2 in. Long
• Adjustment Range (w/ Heim Joints Installed):
• Closed - 17 11/16 in. C-C
• Extended - 18 7/8 in. C-C

Notes:

• This is the link rod that we include in our Jeep JT Gladiator Rear Antirock Sway Bar Kit