6 Channel CAN Module Converts two analog temp channels, two analog pressure channels, a tach input and fuel level input to AEMnet CANbus AEM Electronics

AEM's 4 Port AEMnet CAN Hub is the perfect solution for connecting multiple AEMnet CAN bus-enabled devices together.

This convenient Module provides a central docking station for four AEMnet cables via 4-way DTM-style housings and can provide power to all of the connected devices on the Hub through a single port (3A max current capacity - NOT for use to power Uego sensor heaters).

Users can daisy-chain two 4 Port AEMnet CAN Hubs together for a total of 6 connected devices.

• AEMnet buses must be properly terminated using termination resistors on each end of the port (120 Ohms each, see Specs tab for AEM Devices with termination resistors). AEM offers DTM-style 4-pin termination plugs that simplify this process if you have a device that does not have an integrated or selectable termination resistor
• The 4 Port CAN hub is IP67-rated and can be installed in the engine compartment. Mounting hardware and instructions are included
• Easily connect and power multiple AEMnet CAN devices from a central docking station!
• Four integrated 4-way DTM-style housings provide reliable AEMnet CAN connections
• Daisy chain two Hubs to connect six AEMnet Devices
• Compact enclosure - 3.45 inch (87.63mm) Long x 1.18 inch (29.85mm) Tall
• Safe for engine bay mounting - IP67-rated enclosure
• Mounting hardware included (two 4-40 x 7/8 inch flat head screws, two 4-40 x 0.375 inch washers and two 4-4 x 9/64 inch Nylock nuts)

Details:

• Brand: AEM
• Mounting Hardware Included: Yes
• Warranty: Manufacturer's 1 Year Warranty