Jeep JL and JT Summit LED Fog Lamp Housing Hyline Offroad

If You Have Removed Your LED Fog Lamps From An Oem Steel Bumper, Then You Will Need To Purchase These Brackets To Reinstall The Fog Lamps Into Our Summit Series Front Bumpers. The LED Fog Lamps From The Oem Steel Bumpers Have Completely Different Housings And Will Need To Be Modified To Fit, However Our Specially Designed Brackets Allow You To Cleanly Reinstall The Fog Lamps Directly Into The Bumper. The Plastic Light Housing Modification Is Simple And Can Be Done With A Band Saw, Sander Or A Cutting Tool.

As With All Hyline Offroad Products These Are Designed And Built With Superior Durability And Longevity In Mind. We Put All Bumpers And Accessories Through A Rigorous Finishing Process That Includes An Acid Rinse For Prepping The Metal, Then E-Coated That Acts As A Complete Sealing Primer And Finally A Topcoat Using An Automotive Grade Powder Coat. The Powder Topcoat Is A Very Light Texture Semi-Gloss That Closely Matches The Oem Black Plastic Fender Flare Texture. Though This Is A More Expensive Process It Ensures Your Purchase Will Last For Years To Come.

Features:

• These Brackets Are Required Only If Your LED Fog Lamps Were Removed From An Oem Steel Bumper.
• Simple Trimming Of The Plastic Fog Lamp Housing Tabs Is Required To Fit Fog Lamps.
• These Brackets Fit Into All Summit Series Jl/Jt Front Bumpers And Air Dam Skid Plates.
• Prepped (Acid Rinsed), Primed (E-Coated) And Top Coated (Automotive Grade Textured Powder Coat).
• Proudly Made 100 Percent In USA.

Note:
Hyline Offroad Has Designed These Fender Liners To Allow For Fitment With Most Aftermarket Plastic And Steel Fender Flares. The Hyline Offroad Fender Liners Have Been Successfully Tested And Installed On A Number Of Aftermarket Fender Flares.

Details:

• Material Plastic
• Finish Light Texture Semi-Gloss
• Chemical Cleaning Acid Rinse
• Primer E-Coated
• Finish Type Powder Coat
• Position Front
• Color Black